Sherin Secure Money Storage Safe with Two Combination Locks (Fingerprint + Keypad)
DOI:
https://doi.org/10.56705/860yhn79Keywords:
Arduino, Safe, Fingerprint, Keypad, TestingAbstract
A safe is a tool used to store valuables including money, jewelry, assets or valuable documents. A safe is a storage place that is considered practical but has a high risk. There are several shortcomings in existing safes, including using one key, which makes the safe easy to break into, which can cause losses to the owner. Therefore, it is necessary to innovate or develop by using a combination of several keys by applying fingerprint and keypad technology to add security features to the safe. The solution to this problem can be made by creating a Money Storage Safe Security With Two Key Combinations (Fingerprint + Keypad), this system can open the safe with two combinations of fingerprint and keypad so that it can increase security on the safe. This study aims to design a safe security system using fingerprint and keypad. This system is a prototype that will open the safe door based on the user's fingerprint that has been recognized and uses the keypad to enter a previously created password. Based on the results of research and testing of tools and fingerprints, an accuracy of 100% was obtained for tool testing and 53.33% for fingerprint testing, so it can be concluded that the design of the tool has worked well
References
[2] O. Rea Arsyad And P. Kartika, “Rancang Bangun Alat Pengaman Brankas Menggunakan Sensor Sidik Jari Berbasis Arduino,” Jurnal Mahasiswa Teknik Informatika), Vol. 5, No. 1, Pp. 1–7, 2021.
[3] H. Aji Al Kautsar And S. Watmah, “Perancangan Sistem Keamanan Brankas Menggunakan Metode Finger Print Berbasis Sms Gateway,” Sains Teknik, Vol. 2, No. 2, Pp. 35–39, 2021, [Online]. Available: Http://Jurnal.Bsi.Ac.Id/Index.Php/Insantek35
[4] M. Abiyyu Rama, Dan Nurul Rahma Dinda, D. Dan, M. P. Teknik Elektronika Industri Jurusan Teknik Elektro, And P. Negeri Jakarta, “Kunci Pengaman Brankas Menggunakan Pin Dan Rfid,” Politeknologi , Vol. 15, No. 2, Pp. 101–111, 2016.
[5] Sheny Zahra Amalia, “Prototype Sistem Pengaman Dan Pelacak Brankas Menggunakan Fingerprint Dan Gps Berbasis Internet Of Things,” Laporan Tugas Akhir, Pp. 1–82, 2023.
[6] O. : Geraldy And M. Kadena, “Rancang Bangun Sistem Pengaman Pintu Brankas Menggunakan Fingerprint Dan Keypad Berbasis Arduino Program Studi D4 Teknik Otomasi Jurusan Teknik Elektro Politeknik Negeri Bali 2023.”
[7] Mochammad Asy’ari A, Mimin F Rohmah, And Sugianto, “Rancang Bangun Atap Jemuran Otomatis Untuk Smart Home Berbasis Iot,” Program Studi Teknik Informatika, Universitas Islam Majapahit, Pp. 1–9, 2020.
[8] Bahrin, “Sistem Kontrol Penerangan Menggunakan Arduino Uno Pada Universitas Ichsan Gorontalo,” Ilkom Jurnal Ilmiah, Vol. 9, No. 3, Pp. 282–289, 2017.
[9] Slamet Purwo Santosa And R. Mas Wahyu Nugroho, “Rancang Bangun Alat Pintu Geser Otomatis Menggunakan Motor Dc 24 V,” Jurnal Ilmiah Elektrokrisna , Vol. 9, No. 1, Pp. 38–45, 2021.
[10] W. A. Siswanto, “Aplikasi Absensi Siswa Menggunakan Fingerprint Dan Penjadwalan Mata Pelajaran Di Sekolah Dasar Negeri Sumbernongko Jombang,” Program Studi Teknik Informatika, Universitas Islam Majapahit, Pp. 1–10, 2020.
[11] F. Elsa Safitri, “Rancang Bangun Pengaman Pintu Otomatis Menggunakan Sidik Jari (Fingerprint) Dan Password Berbasis Arduino,” Jtein: Jurnal Teknik Elektro Indonesia, Vol. 3, No. 2, 2022, Doi: 10.24036/Jtein.V3i2.269.
[12] R. Satra, M. S. Hadi, Sujito, Febryan, M. H. Fattah, And S. R. Busaeri, “Ioat: Internet Of Aquaculture Things For Monitoring Water Temperature In Tiger Shrimp Ponds With Ds18b20 Sensors And Wemos D1 R2,” Journal Of Robotics And Control (Jrc), Vol. 5, No. 1, Pp. 62–71, 2024, Doi: 10.18196/Jrc.V5i1.18470.
